ARROW E 48R

Klippebredde: 122 cm (48")
Dæk type: Bagudkast

Fully electric. Maximum manoeuvrability with a gentle working posture in a standing position.

Stand-on mowers are comfortable and fast, but particularly compact, agile and spacesaving. Your back and muscles will thank you for the upright working position.

Designed for use in areas where noise and carbon emissions are restricted, the ARROW E 48R is a fully commercial battery-powered stand-on mower, with a 122cm (48″) rear discharge cutting deck.

  • Powered by four interchangeable FusionCore lithium-ion 56V DC, 4kWh batteries
  • Features patent-pending spindle technology, designed to absorb impact with minimal damage to spindles
  • QuickSwap battery system enables all-day cutting (dependent on cutting conditions)
  • Charge time of 5.3 – 12 hours (depending on charger)
  • Features a 122cm (48″) fabricated rear discharge deck constructed of strong 7-gauge steel
  • Intuitive controls
  • Folding operator platform for maximum versatility
  • ECO mode – increases battery life
  • LED interface displays important information
  • Foot-assisted cutter deck adjustment
  • 5-year or 1500 hours warranty/ 3-year battery warranty

*Photos and illustrations are a representation of the product, actual product may differ

Einsätze

PRO Electric Stand-on (standing) Rear discharge Flat terrain Undulating terrain Hilly terrain Medium-sized areas

Merkmale & Vorteile

Battery capacity

4 individual 56V battery packs of 4 kWh each = 16 kWh total capacity. Premium Panasonic Li-NMC cells.

Quickswap battery system

The swappable battery system gives you the capability to mow all day*. When batteries run out, just swap them in seconds and continue working. The Ariens FusionCore battery system is currently the only commercial system on the market with swappable batteries. It allows unrivalled flexibility and compatibility between the ZENITH E and ARROW E.

* Depending upon operational hours, operator usage and cutting conditions

Brushless spindle motors with slipping clutch

The high-performance spindle motors of the knives are equipped with a slip clutch. In the event of a collision with a foreign object, it allows the blade to "slip" and thus protect the motor from damage. If the worst comes to the worst, the cutter shafts and lower bearings can be replaced.

Foot-supported mower deck adjustment

Quality has its weight. The solid mowing deck of the ARROW E is welded from 4.5 mm thick sheet steel. The deck height is adjusted smoothly using a combined system of foot pedal and manual lift.

Led display / interface

The color LED display keeps you constantly up to date.

• Charge status of all batteries
• Operating modes
• Operating hours counter
• System diagnostics
• Fault messages

No external device is required for diagnostics.

Eco-mode - don't waste energy

The ARROW E has an ECO mode switch. The highest blade speed is not required when the amount of clippings is low or the driving speed is slow. In this case, use the ECO mode to reduce the blade speed.

Folding driver's platform

The spring-mounted driver's platform can be folded upwards for transportation. It can also be used when working under low-hanging branches or when driving on slopes of up to 20°. This turns the ARROW E into a walk-behind mower in no time. By the way: No suspension system in the world is as good as human legs. This is a major advantage of stand-on mowers for the health of the driver.

Intuitive controls

All functions of the machine are clearly visible and within easy reach of the operator. The maximum travel speed can be limited via a quick action mechanism with magnetic plug. Also features electric parking brake and two driving speed levels.

Tekniske data

Modelnummer 998304
Drivsystem Ariens FUSIONCORE brushles electric wheel motors with reduction gear, 2 x 5 kW max.
Maks. hastighed fremad / bagud 17.7 km/h / 8.9 km/h (11 mph / 5.5 mph)
Dæk type, bagudkast / sideudkast /
Dækmateriale 4,6 mm stålplade
Dækkonstruktion welded
Dækløftesystem foot pedal and hand lever
Antal knive 3
Spindelmateriale Smedet aluminium
Spindeldrift Ariens FUSIONCORE direct electric drive brushless, 3x 3.5 kW max.
Klippebredde 122 cm (48")
Klippehøjder 3.8 cm - 12.7 cm (1.5" - 5.0")
Klippepositioner 15
Forhjul 13 x 6.5-6 semi-pneumatic
Baghjul (tommer) 20 x 10-10
Førerplatform Ophængt, sammenklappelig
LED-interface med timetæller & 2 USB-opladningsstik
Vægt 545 kg
Længde 190 cm
Bredde 127 cm
Højde 117 cm
Begrænset garanti maskine 5 years / 1,500 hours, no hour limit in the first 2 years
Garanti batteri (år) 3
Batteritype 56V Ariens FUSSIONCORE Li-Ion swappable
Batterikapacitet 4 x 4 kWh
Antal batterier 4 quick-change
Opladningstid Hurtigopladning: 5,3 t; standardopladning: 11 t
Ændringer i teknologi, udstyr og pris forbeholdes. Af informationer eller illustrationer kan der ikke afledes krav.

Tilbehør

56V battery kit (single battery)

Extend your cutting time capability with an additional Lithium-Ion QuickSwap 4 kWh battery.

Off board charger kit

Charge up to four additional batteries outside of the machine. Charging time 4 batteries 0-100%: 12 hours. Option to upgrade to Fast Charger.

Fast charger w/y harness kit

Additional charger. Charges the four batteries in the machine in just 5.3 hours.

Anvendelser