ARROW E 48R

Cutting Width: 122 cm (48")
Deck Type: Rear Discharge

Helt elektrisk. Maximal manövrerbarhet med bekväm, stående arbetsställning.

Stand-on-klippare är bekväma och snabba – men framför allt kompakta, smidiga och yteffektiva. Din rygg och dina muskler kommer att tacka dig för den upprätta arbetsställningen.

Utvecklad för användning i områden där buller och koldioxidutsläpp måste hållas på ett minimum. ARROW E 48R är en fullt kommersiell batteridriven ståpåklippare med ett 122 cm (48″) bakutkastdäck.

  • Drivs av fyra utbytbara FusionCore litiumjonbatterier (56 V DC, 4 kWh).
  • Spindelteknik med patenterad design som minimerar skador vid stötar.
  • QuickSwap-batterisystem möjliggör heldagsklippning (beroende på klippförhållanden).
  • Laddtid 5,3–12 timmar beroende på laddare.
  • 122 cm (48″) svetsat bakutkastdäck tillverkat av starkt 7-gauge-stål.
  • Intuitiva reglage.
  • Hopfällbar plattform för maximal flexibilitet.
  • ECO-läge för längre batteritid.
  • LED-display visar viktig information.
  • Fotassisterad höjdjustering av klippdäcket.
  • 5 års eller 1500 timmars garanti / 3 års batterigaranti.

*Bilder och illustrationer visar exempel. Faktisk produkt kan skilja sig från visad modell.

Einsätze

PRO Electric Stand-on (stående plattform) Rear discharge Fladt terræn Ujævnt terræn Kupert terreng Medium-sized areas

Merkmale & Vorteile

Battery capacity

4 individual 56V battery packs of 4 kWh each = 16 kWh total capacity. Premium Panasonic Li-NMC cells.

Snabbväxlingssystem för batterier

Det utbytbara batterisystemet gör det möjligt att klippa hela dagen*. När batterierna tar slut byter du ut dem på några sekunder och fortsätter arbetet. Ariens FusionCore-batterisystem är för närvarande det enda kommersiella systemet på marknaden med utbytbara batterier. Det ger oöverträffad flexibilitet och kompatibilitet mellan ZENITH E och ARROW E.

*Beroende på driftstimmar, användning och klippförhållanden.

Brushless spindle motors with slipping clutch

The high-performance spindle motors of the knives are equipped with a slip clutch. In the event of a collision with a foreign object, it allows the blade to "slip" and thus protect the motor from damage. If the worst comes to the worst, the cutter shafts and lower bearings can be replaced.

Fotstödd klippdäcksjustering

Kvalitet har sin vikt. Det robusta klippdäcket på ARROW E är tillverkat av 4,5 mm tjockt stål. Höjden på däcket justeras smidigt med ett kombinerat system av fotpedal och manuell lyft.

Led display / interface

The color LED display keeps you constantly up to date.

• Charge status of all batteries
• Operating modes.
• Operating hours counter
• System diagnostics
• Fault messages

No external device is required for diagnostics.

Eco-mode - don't waste energy

The ARROW E has an ECO mode switch. The highest blade speed is not required when the amount of clippings is low or the driving speed is slow. In this case, use the ECO mode to reduce the blade speed.

Folding driver's platform

The spring-mounted driver's platform can be folded upwards for transportation. It can also be used when working under low-hanging branches or when driving on slopes of up to 20°. This turns the ARROW E into a walk-behind mower in no time. By the way: No suspension system in the world is as good as human legs. This is a major advantage of stand-on mowers for the health of the driver.

Intuitive controls

All functions of the machine are clearly visible and within easy reach of the operator. The maximum travel speed can be limited via a quick action mechanism with magnetic plug. Also features electric parking brake and two driving speed levels.

Technische Daten

Model Number 998304
Drive System Ariens FUSIONCORE brushles electric wheel motors with reduction gear, 2 x 5 kW max.
Max. Speed Forward / Backward 17.7 km/h / 8.9 km/h (11 mph / 5.5 mph)
Deck Type, Rear discharge / Side discharge /
Deck Material 4,6 mm stålplåt
Deck Construction welded
Deck Lift System foot pedal and hand lever
Number of blades 3
Spindle Material Smidd aluminium
Spindles drive Ariens FUSIONCORE direct electric drive brushless, 3x 3.5 kW max.
Cutting Width 122 cm (48")
Cutting Hights 3.8 cm - 12.7 cm (1.5" - 5.0")
Cutting Positions 15
Front Wheels 13 x 6.5-6 semi-pneumatic
Rear Wheels (inch) 20 x 10-10
Driver Platform Upphängd, hopfällbar
LED Interface w/ Hour Counter & 2 USB Charging Sockets
Weight 545 kg
Length 190 cm
Width 127 cm
Height 117 cm
Limited Warranty Machine 5 years / 1,500 hours, no hour limit in the first 2 years
Warranty Battery (Years) 3
Battery Type 56V Ariens FUSSIONCORE Li-Ion swappable
Battery Capacity 4 x 4 kWh
Number of Batteries 4 quick-change
Charge Time Snabbladdning: 5,3 t; standardladdning: 11 t
Änderungen und Irrtümer vorbehalten. Aus Angaben und Abbildungen können keine Ansprüche abgeleitet werden.

Zubehör

56V battery kit (single battery)

Extend your cutting time capability with an additional Lithium-Ion QuickSwap 4 kWh battery.

Off board charger kit

Charge up to four additional batteries outside of the machine. Charging time 4 batteries 0-100%: 12 hours. Option to upgrade to Fast Charger.

Fast charger w/y harness kit

Additional charger. Charges the four batteries in the machine in just 5.3 hours.

Anwendungen